Digital TDS & EC Meter Tester

R349

Digital TDS & EC Meter Tester

A quick and easy measurement that displays Conductance (μs or ppm) via large LCD screen with additional HOLD function. 

Technical data
Measuring ranges: Conductance (EC): 0-9990 µs/cm / TDS: 0-9999 ppm
Accuracy: +/- 2%
Dimensions: 154 x 30 x 14 mm
Batteries Included

 

Delivery Nationwide!

Description

Digital TDS & EC Meter Tester

Easy-to-use conductivity meter to measure the electrical conductivity of aquarium water, tap water, osmosis water or rainwater. In addition to the conductivity, the water temperature is also shown in the display and also taken into account for measuring the conductivity.

Combined EC (Microsiemens) and TDS meter, measure conductance and PPM in one device.

Technical data
Measuring ranges: Conductance (EC): 0-9990 µs/cm / TDS: 0-9999 ppm
Accuracy: +/- 2%
Dimensions: 154 x 30 x 14 mm

Usage
1. Remove the electrode protection cap
2. Press the On / Off switch, hold the lower part of the device in the water so that the electrode is completely immersed. Maximum depth approx. 3.5 cm (cap edge)
3. After the value has stabilized, press the HOLD button and remove the device from the water to read the value
4. Switch off the device after use and put on the protective cap

Note
This product has a 3V CR2032 button battery, this is included.

Functions
HOLD Function: Press the HOLD button to fix the value in the display. Use the SHIFT button to release the value again.
AUTO SHUT-OFF: To save the battery, the device switches off after some time without use.
SHIFT: When you press the SHIFT button, four modes are displayed

Note
To protect the electrodes, insert the protective cap after each use.
The device is not waterproof, please always immerse only the electrode area in water, up to the cap edge (immersion line)